SEAFORTH MFG PTY LTD 2584 GLEN DAVIS RD GLEN DAVIS NSW 2846

MANUFACTURERS OF CEDAR VENETIANS FOR OVER 50 YEARS

 PH 61+ 02 63 797243 FAX 61+ 02 63 797234  SYDNEY 02 9971 5782 

PLEASE NOTE; Your return email address is not automatic you must supply details or we can not return your quote.

Fields *= details minimum.

*

*

email address:*

If more blinds needed press reset start from top of page and submit again until you have all blinds needed to quote

    OR JUST FILL OUT AND PRINT THIS FORM AND FAX 

  

TERMS 1/3 DEPOSIT REQUIRED FOR COMMENCEMENT OF WORK. BALANCE ON COMPLETION.

Seaforth Mfg Pty Ltd ACN 000 086 304 2584 GLEN DAVIS RD GLEN DAVIS NSW 2846

PO BOX 208 Harbord 2096. PH 02 63 797243 FAX 02 63 797234

INTERIOR REVEAL MEASUREMENT

For blinds to fit inside window frame, measure reveal. Deduct 15mm from width ( bracket allowance ). When ordering please state whether deductions have been made.

INTERIOR FACE MEASUREMENT

For blinds to fit on face of window frame measure desired width ( usually to edge of architrave minus 5mm ). When ordering please state whether deductions have or have not been made.

EXTERIOR BLIND MEASUREMENT

Take measurements between uprights and deduct 20mm from overall width. Measure desired drop on blind minus 50mm for fitting clearance. Measure desired cable length to sill or deck if cable is to be longer than blind drop.

For both interior & exterior blinds state position of pull and tilt cord ( right or left )

Measurements are to be in metric. For further advice please contact us.